The QD-5PL-ZL sits in the middle of the cabinet range, delivering 25 kW across roughly 150–200 m² from a three-phase 380 V supply. It is the most commonly specified capacity for medium-sized workshops: large enough to make a real difference to working conditions, small enough to remain economical to run.

As a cabinet-format unit it stands on the floor rather than hanging from the structure, which makes installation and servicing straightforward and avoids any load being imposed on the building's roof or gantry. The axial-flow fan discharges directly into the working area at a throw of 8 – 10 m, so no ducting is needed in most layouts.

Total power consumption is 4.6 kW rated and 5 kW at maximum load, with a rated current of 7.5 A and a maximum operating current of 10.5 A. The indoor unit weighs 135 kg and the outdoor section 84 kg. Water connection is by a DN20 tap water make-up line and a DN32 connecting pipe between the indoor and outdoor sections. The three-phase 380 V supply keeps current draw low relative to the cooling delivered, which reduces cabling requirements.

Key Features

25 kW industrial cooling capacity for approximately 150 – 200 m²
6,500 m³/h maximum air volume with a 8 – 10 m air supply distance
Axial-flow fan — direct air discharge without ducting in most layouts
Floor-standing cabinet format: simple installation, easy access for servicing
Power supply 380V ~ 50Hz: 7.5 A rated, 10.5 A maximum operating current
Rated power 4.6 kW, maximum operating power 5 kW; noise level 60 dB(A)
Water-cooled circuit — DN20 tap water make-up, DN32 indoor-to-outdoor connecting pipe
Unit weight: indoor 135 kg / outdoor 84 kg

Technical Specifications

Model	QD-5PL-ZL
Industrial cooling capacity	25 kW
Rated power supply	380V ~ 50Hz
Rated current	7.5 A
Rated power	4.6 kW
Maximum operating current	10.5 A
Maximum operating power	5 kW
Applicable area	150 – 200 m²
Air supply distance	8 – 10 m
Maximum air volume	6,500 m³/h
Tap water make-up pipe	DN20
Indoor / outdoor connecting pipe	DN32
Working overpressure (exhaust / suction)	2.8 / 1.5 MPa
Max. allowable high / low pressure	2.8 / 1.5 MPa
Noise	60 dB(A)
Unit weight	Indoor 135 kg / Outdoor 84 kg
Place of origin	Ningbo, Zhejiang, China

Applications

Workshops of 150 – 200 m² that need reliable industrial cooling without a ducting installation.
Production areas where a floor-standing unit is preferred for ease of servicing and relocation.
Factory buildings with an existing three-phase distribution board and adequate spare capacity.
General workshop cooling where direct air discharge into the working area is sufficient.
Facilities that need a straightforward, robust cooling solution with minimal installation work.

Customization & ODM Service

Qixin Technology manufactures vertical axial flow cabinet air conditioner to order. Cooling capacity, supply voltage, cabinet dimensions, fan type, outlet configuration, control panel and casing finish can all be adapted to your specification. We also produce the sheet metal structure in-house, so non-standard dimensions and mounting arrangements can be accommodated without the lead times that come from outsourcing.

For OEM and private-label projects we supply custom nameplates, branded documentation and packaging. Please send your workshop dimensions, ambient temperature range, power supply available on site and target budget, and our engineering team will recommend the correct model and configuration — usually within one working day.

Related Products

Vertical Axial Flow Cabinet Machine — 15 kW (QD-3PL-ZL)

Message

Please provide the following valid information, and we will contact you as soon as possible.

Submit